Explore our high-reliability power supplies, PCB mount modules, desktop adapters, and regulated bench sources optimized for global export to Israel’s high-technology ecosystem.
An in-depth analysis of thermal derating, isolation topologies, EMI/EMC compliance, and power density optimization for Israel’s high-tech manufacturing sectors.
Designing board-mounted DC/DC power architectures for unventilated military enclosures, high-field medical imaging suites, or dense semiconductor fab equipment requires balancing Size, Weight, Power, and Cost (SWaP-C). Standard off-the-shelf power modules often fail under Israeli ambient climate extremes (+85°C to +105°C PCB operating temperatures) without careful thermal baseplate coupling and galvanic isolation design.
Engineered to handle severe DC bus fluctuations, battery discharge curves, and transient surges common in 12V, 24V, 48V, and 110V military-industrial power grids across Israel.
Featuring up to 4200VAC / 5000VDC isolation with 2xMOPP (Means of Patient Protection) compliance adhering to IEC/EN 60601-1 3rd Edition for patient-connected medical electronics.
Planar magnetic topologies combined with integrated metal-core baseplates enable seamless heat dissipation directly into system aluminum chassis without requiring bulky fans.
Use this decision matrix to shortlist module pinouts, power ratings, and isolation parameters for embedded Israeli PCB layouts.
| Form Factor | Power Output (W) | Input Voltage (VDC) | Isolation Rating | Typical Efficiency | Target Local Application |
|---|---|---|---|---|---|
| SIP-7 / DIP-8 | 1W – 6W | 4.5-9, 9-18, 18-36 | 1500VDC – 3000VDC | 82% – 87% | IoT Sensor Nodes, Telemetry R&D |
| 1" x 1" Micro-Brick | 10W – 40W | 9-36 (4:1), 18-75 (4:1) | 2000VDC – 3000VDC | 88% – 92% | Industrial Robotics, Agritech Controllers |
| 1/16th Brick (DOSA) | 35W – 120W | 18-75, 36-75 | 2250VDC Basic | 91% – 94% | 5G Telecom Base Stations, Datacom |
| 1/8th Brick Conduction | 50W – 300W | 9-36, 18-75, 40-160 | 3000VAC Reinforced | 93% – 95% | Defense Avionics, UAV Flight Controls |
| 1/4th & 1/2 Brick Heavy Duty | 150W – 700W | 18-75, 180-400 (HVDC) | 4200VAC / 2xMOPP | 94% – 96.5% | Semiconductor Equipment, Medical Scanners |
From defense technology in Haifa to medical innovations in Yokneam and semiconductor tooling in Kiryat Gat, our board-mount converters deliver bulletproof reliability.
Unmanned Aerial Vehicles (UAVs), tactical communications, and radar units manufactured in Haifa and Be'er Sheva demand MIL-STD-810H environmental ruggedness, MIL-STD-461G conducted EMI compliance, and 4:1 wide input ranges to survive severe battery dropouts.
Israel’s medical device leaders require ultra-low leakage current (<2µA) board-mount DC/DC power modules with 2xMOPP isolation. These power surgical robots, portable ultrasound scanners, and patient monitoring devices with zero electrical interference.
Silicon wafer processing equipment operating in major Israeli semiconductor fabs relies on SEMI F47 sag-immune auxiliary board converters. These modules maintain uninterrupted 24/7 power rail stability during utility line sags.
Autonomous agricultural machinery and smart irrigation sensors deployed in desert environments depend on high-efficiency, epoxy-encapsulated board converters that withstand extreme vibration, dust, and coastal salt fog.
Understanding the procurement priorities and technical shifts shaping Israel’s hardware engineering landscape.
Israeli defense and commercial hardware engineers prioritize Size, Weight, Power, and Cost (SWaP-C). The shift toward 1/16th and 1/8th brick packaging allows engineers to fit kilowatt-class conversion into 1U chassis envelopes.
Next-generation Israeli power design teams are rapidly adopting Gallium Nitride (GaN) and Silicon Carbide (SiC) topologies on-board to achieve up to 96.5% switching efficiency, drastically reducing thermal sinks.
With stringent international trade regulations, Israeli technology exporters require full component origin transparency, RoHS/REACH compliance documentation, and stable long-term supply chain guarantees.
Backing your electronics design with over 60 years of applied power engineering heritage, ISO 9001:2015 and ISO 13485 certified quality management systems, and 100% burn-in verification on every exported unit.
When catalog board-mount DC/DC converters do not meet your footprint, output voltage rail (e.g., 28V to 3.3V/5V/12V dual output), or conformal coating requirements, our engineers modify standard platforms or create ground-up custom designs quickly.
We provide conducted and radiated EMI spectrum baseline data for CISPR 32, FCC Class B, and MIL-STD-461G. Our technical application engineers help you optimize board-level LC input filter layouts before sending PCBs to test houses in Israel.
Addressing import compliance, shipping logistics, thermal management, and customization for Israeli high-tech OEMs.
Speak directly with an application engineer to review your schematic layout, thermal calculations, and isolation requirements for your next project in Israel.
Inquire Now
